top of page
New MH200 Series Digital Magnetic Field Strength Meter
It is designed to measure the AC field or residual field using a Hall probe in kA/m or Gauss.
 
It differs from the previous model MH175 by using a powerful PIC24 microprocessor from Microchip with a high precision Sigma-Delta 16 bit AD convertor and by placing the calibration data directly in the probe. The display unit now provides clearer information about the measurement being performed. Putting the device into standby mode is linked to the comparison of magnetism values over time and makes it possible to better manage the energy in the batteries. Measurement ranges have also been increased swhile maintaining accuracy.

MH200 Digital Magnetic Field Strength Meter

  • DC measurement ranges ±0 - 35 kA/m
    AC measurement ranges ±0 - 25 kA/m
    Resolution/accuracy 10 A/m
    Measured field AC, DC with polarity indication (push button selection)
    Units kA/m or Gauss
    DC field signalling "DC"
    AC field signalling "AC"
    Probe handheld tangential Hall probe, removable
    Automatic zeroing yes, every time the device is turned on
    Weight [g] 203 including probe and batteries
    Dimensions [mm] 78 x 117 x 22
    Accuracy class

    DC ±3% + 1 dig. of measured value
    AC ±5% + 1 dig. of measured value
    Frequency range 10 Hz to 200 Hz for AC measurement according to specification
    Power

    2 AA 1.5 V alkaline batteries (pencil battery)
    Automatic shutdown

    after 5 minutes (always - during operation and inactivity of the device)
    Battery status indication

    when the supply voltage drops below 1.6 V, the inscription "Batt" lights up on the display
    Withdrawal

    typically 22 mA
    Operating temperature 5ºC to +40ºC

    Supplied in a carrying case with probe and batteries.

bottom of page